7 classic must-read polymer flood submissions

You need to know

How do you get up to speed on polymer flooding quickly from a field implementation perspective?

Taking a class is fine. Skimming a text book is great. Reading a few technical papers is okay. Attending a lecture might help.

But if you want a real look at polymer field implementations you need to use AppIntel AI to find polymer flood submissions by industry. Each submission is ground truthed to actual UWIs. Each submission is adjudicated by a picky regulator.

1. Primer

One operator started a new polymer flood. In his justification, he discussed the earliest polymer floods in the province. He describes polymer flooding with primer-like detail.

You can see his submission documents in moments from our self serve portal.

If you are operating or planning a polymer flood, you must to read this and 6 other classic polymer submissions from AppIntel AI.

2. Polymer diverter trial

One operator tried a new type of polymer to divert water in a water flooded reservoir. The polymer is named nanospheres. He belived that the nanospheres will set up in water-frequented pathways. If successful, this polymer will force injection water into unswept portions of the reservoir.

3. High salinity polymer polymer flood

The AER recently approved an expansion of a successful ASP flood. All the details of the lab studies and field pilot are included in the submission. They predict an additional recovery range of 10-13%. Sensitivity of polymer to brine water hardness and reservoir temperature was examined. They propose a mixture of vertical and horizontal polymer injector wells.

4. Polymer doubles recovery

In his submission documents, he shows a recent polymer flood where he is already reducing GOR and water cut. He's sure he can improve recovery by at least double using this injection fluid. His oil is 14 degree API.

5. Injecting polymer without plugging off

A common problem with polymer and related ASP flooding technology is the injector plugging. One operator believes they have found the solution. They believe they have found a particular polymer chemistry that won't form a gel structure until the differential pressure is decreased to a transition pressure.

6. Polymer injection pattern

One operator is quadrupling an ASP flood. His submission contains his work on injectant composition and his injection pattern.

7. Life after polymer

One operator gave up on a polymer flood and returned it to water injection. Although their pilot technically worked it didn't meet their corporate hurdles. You can read all about the analysis of the flood in these submission documents.

Tags: Polymer, Heavy Oil

Granger Low  15 Feb 2017

Better views than from a drone

Watch and copy the successes of others

Polymer: Here are the dividends of collective genius

The wisdom of the many outweighs the assumptions of the few

You don’t know what you don’t know about injection water treatment

AppIntel AI fixes that

Polymer - hot and salty

High pressure, high temperature, high salinity